The Quickest Guide To How To Seal Tile Floor?
Are you worried that excess dirt and plaque might destroy your tile’s neat look? If yes, then cheer up! Today through this article, we are going to guide you on how to seal tile floors. Read this article till the end to get the required know-how to seal the tiles.
We do know you have spent hefty amounts on your tiles. However, if they are not sealed, then you might not get that perfect shiny tile. To have your tiles shine like a mirror and remain the same for ages, you need to seal them perfectly.
Without further ado, let’s get to know how to seal them tiles for good.
4-Step Guide How To Seal Tile Floor?
Sealing tile floors might seem a tiresome task at first. However, with the right tips and tricks, you will be at ease. We have compiled 4 of the easiest steps about how to seal tile floors for you.
Step 1: Identify The Need Of Your Tile
The first and foremost step involves the identification of your tile. As different kinds of tiles may need special kinds of sealants. For this purpose, be sure what your tile is and how it needs to be treated.
Your tile might be a natural stone or some composite; therefore, to not damage their pores, you need to know what is suitable for it. Furthermore, beforehand applying anything, be aware of whether your tiles are sealed or not.
For this purpose, you can spill water on them, and if they appear to be shiny, they are sealed. Whereas, if they appear to be matt, then, in that case, you need to seal them as soon as possible!
Step 2: Initial Preps
As soon as you identify the type of your tile, you are good to go. Start by cleaning up the space you are going to apply the sealant on. Besides, if there is any space, you don’t want to apply the sealer; you can cover it with adhesive.
Ensure that all the tiles you are going to apply sealant are completely dry. Any moisture present on these tiles might render the properties of the sealant.
Step 3: Apply Sealer
Now, as you know where to apply sealer, start applying to the areas. Try to apply it using a sponge tool. This will prevent any mishap from happening, and the application will be smooth too. You can have help from some sealants like K.O.R. Ironclad “Tile And Stone Sealer” or Natural “Enrich & Seal” from K.O.R. Stone.
Be careful and apply coats evenly all over the tiles. An uneven application might give your tiles a messed-up look which is indeed not something appealing.
Step 4: Final Touches
When you have applied a sealer, let it dry. This may take up to 10-15 minutes but not more than that. For better results, try to apply a second coat of sealant and let it dry overnight. In this way, you will close every open pore on the surface. And this second layer will also aid another level of security.
When the sealant is completely dry, wipe up the residue with a microfiber towel. Also, remove the adhesives as well.
Which Products To Use?
There are a lot of sealers present in the market at the moment. However, many of them have harsh chemicals that might damage the pores of your tiles. To have your tiles not lose their charm, try to use natural and harmless products. K.O.R. Ironclad “Tile And Stone Sealer”, Natural “Enrich & Seal” from K.O.R. Stone, or Rarefier from K.O.R could be your best bets in this regard.
Hopefully, now you know how to seal the tile floor, and you are all set to do it soon. To have an easy hand at sealing, try to follow our 4-step guide mentioned in this article. Moreover, do keep an eye on the products you use to extend the life of your tiles. At Kennedy Kitchens and Baths, we’ve been helping homeowners with their home improvement needs for over 40 years. From kitchen remodels to bathroom upgrades, we offer a wide range of services that can help you make the most out of your living space. To schedule an appointment or find more information about any of our products and services, call us today at 706.888.8832!
Best of luck!
K.O.R. Stone Care Products:
how to, seal, tile