Are you renovating your bathroom but have no idea about the perfect heights for towel bars and bathroom hardware? If yes, then you have landed at the perfect place. Read this article till the end to learn how to adjust your bathroom hardware to the right height.

We can understand how uneasy it can be to have a messed-up bathroom at times. But when you are aware of the standard bathroom hardware spots, you have nothing to worry about. Today we will tell you all about installing the bathroom’s hardware, including the heights and materials. So let’s get started.

How To Select The Perfect Bathroom Hardware?


Selecting perfect bathroom hardware depends on many things, but mainly it’s you who will make the decision in the end. Most importantly, specify your budget just in the beginning. Make it clear what your boundaries are.

Next, look out for hardware that can last you long. As you never want to spend hefty bucks every now and then on the bathroom hardware, pick the one that is durable and affordable at the same time.

Plus, make sure you have enough space available for the hardware you will purchase. After all, you don’t want to end up purchasing your favorite shelves or towel handles and end up not using them. You can have experts like Kennedy Kitchen and Baths at hand.

Lastly, just because you saw it doesn’t mean you will purchase it. Purchase what you need and leave the rest behind. Important bathroom hardware you might need is a towel bar. How to have a perfect one is explained in the next segment.

How To Select A Perfect Towel Bar?


Picking up a towel bar for your bathroom depends on how much space you have. Suppose you have a spacious bathroom; you can have one along with the faucet and one with the shower. However, if your bathroom is packed, then a single towel bar might be enough.

Most commonly, rowels bars are available in 18, 24, and 32-inch sizes. What size you go for depends on how much space you have and the size of the towels you will hang. Suppose for face or hand towels, the 18-inch would fit well. But for a bath sheet, a 24 or 32-inch towel bar should be selected.

For the material, you can select among plastic or steel towel bars. There can be some made of wood, but it is preferred to not use them in the bath area because they might get damaged because of the moisture. If you want long-lasting bathroom hardware, purchase one made of stainless steel as it is rust proof and resistant to corrosion.

Read the next section to choose the perfect height for your towel bar.

How To Choose A Standard Height For Bathroom Hardware?

The standard heights for bathroom hardware are different for each of them. For example, a towel bar can be installed 42 to 48 inches off the ground. A shower rod is good to install 75 to 77 inches off the ground. A toilet paper holder must be at least 26 inches off the ground. 

These aren’t the fixed sizes, and you can, of course, change the measurements according to what is feasible for you. If you have children at your home, consider installing them a bit lower than usual, and when they grow a bit, you can alter the height accordingly.

Whereas the size of the vanity largely depends on how much space you have. If you have a spacious bathroom, you can have the 72 inch Double Bathroom Vanity with Sink. But if you are running out of space, you can go for the MADISON Single Bathroom Vanity with Glass Door.

Quick Installation:

You might be thinking installing hardware in your bathroom might take you some 5 working days and a lot of technicians at hand. But that is not the case! You just have to follow the below simple steps.

Step 1: Measure the available space and materials you want to purchase.

Step 2: If you have purchased a vanity, install it and make connections for hot and cold water to the faucet. You can have help from experts like Kennedy Kitchen and Baths. For the mirror, you can mount it onto the wall using hooks.

Step 3: Next, for the hardware like towel bar, toilet paper holder, and shower rods, first clean the surface you are going to install the hardware on. Then mark the standard height off the ground using a marker and drill some nails to mount them. And that’s all!

Things To Take Care Of

Installing bathroom hardware isn’t a big deal. But there are certain points that you need to take care of. Let’s have a read at them one by one.

  • Make sure the area is free of grease and dirt.
  • Choose a standard height not too low or too high off the ground.
  • Go for corrosion-free hardware for the bathroom

Final Words


To sum it up, installing a towel bar and other bathroom hardware at standard heights makes using the bathroom much easier. Make sure you are aware of the space you have and the materials you will purchase. You can contact experts like Kennedy Kitchen and Baths to have a safer experience. 

So what is stopping you from having that flawless bathroom setup? Get up now and start working on it!

More Articles:

Modern Style Grab Bars – for Showers

Trending Black Fixtures: Contemporary, Elegant & Bold

Trending Light Fixtures 2022


Jeff Kennedy

Editor in Chief

of Vade Mecum of Luxury Journal, multiple site contributor, writer, renovation professional He has been an active participant in the construction industry for 32 years, doing everything from design to finish work.
He shares his unique perspective on renovation and construction through writing about professional experiences. Jeff’s motto is that “enjoying what you do is the best feeling.” If you enjoy your job with friends, then you will never have to go to work!

Get featured in our magazine