K.O.R. Ironclad “Tile and Stone Sealer”

$48.81

K.O.R. Ironclad “Tile And Stone Sealer” Creates A Tight Seal Over Tile And Stone For Efficient Cleaning

Put down that tile cleaner! You’re skipping a critical step which can make your tile and stonework last for years.
The K.O.R. Ironclad “Tile and Stone Sealer” creates a protective layer over porous stone and tile surfaces making them resistant to stains and moisture.

  • Granite
  • Marble
  • Limestone
  • Saltillo
  • Walls
  • Travertine
  • Concrete
  • Masonry

Choose K.O.R. Ironclad “Tile and Stone Sealer” for luxury bathroom renovations or a simple cleaning job and make stone and tile-work last for years.

Category:

Description

How K.O.R. Ironclad “Tile and Stone Sealer” Works

K.O.R. Ironclad “Tile and Stone Sealer” places a thin layer of high-end polymers between the surface of the tile or stone and the potential stain. So when you clean the surface with a tile or stone cleaner, the seal gives you time to clean up before the potential damage becomes permanent.
Using the sealer is as simple as wiping a countertop or mopping a floor:

Step 1

Clean the surface thoroughly making sure to remove all dust, grease, moisture and other contaminants.

Step 2

Apply K.O.R. Ironclad “Tile and Stone Sealer” using a clean sponge or a mop with a lambswool applicator.

Step 3

Allow the sealer to sit for 5 minutes. The sealer may penetrate quickly on porous surfaces. If the surface dries up before time’s up, apply an additional layer of the sealer.

Step 4

Wipe the area completely dry with a clean, microfiber cloth or paper towel. Make sure to remove all residue.
It’s that simple!

Reviews

There are no reviews yet.

Be the first to review “K.O.R. Ironclad “Tile and Stone Sealer””

Your email address will not be published.

Title

Go to Top