Do you want to install tiles in your brand-new shower? Or want to replace the current ones? Either way, we have a short comprehensive guide on how to tile a shower floor.
You take a shower to release the stress and tiredness of the day. But if you are disturbed with the floor and can’t even stand in comfort, the weariness remains. A tiled one provides a stable and comfortable place to stand and drain the water well.
Here we will show you the right way to install tiles on your shower floor. Let’s go!
Steps To Tile a Shower Floor
Tiling a floor is not a hard task, but it is not so easy either. You need to take care of different aspects and balance their orientation, so water only moves to the drainage hole. Let’s check out the steps on how to tile a shower floor.
Calculate the square foot of Your Shower
First, determine the size of your showering area. Then take a measuring tape and calculate the parameter of the box. Note down the adjacent lengths of the area, and multiply their sum by 2.
Calculate the Number of Tiles Required
Now, estimate the number of tiles you will need. If you have selected the tile, measure its length and width. Grab a notepad and pencil to do the calculations. Also, it will help you avoid under-buying or over-buying situations (in case if you haven’t yet).
Dry Install Tiles for Preciseness
Take all the tiles to the shower and place them on the floor. But remember, the purpose is to test their size, number, and arrangement. This way, if there’s a need for any adjustments, you can do it in time.
After counting and setting all the tiles for ready to use, start with the drainage hole and move towards the walls. Adjust the gaps between the tiles and separate them with proper spacing. When you reach the walls, you will have exact figures on how much extra strip you need to cut from outer pieces to fit them in the area.
Apply the Mortar
When you finalize the arrangement and are satisfied with the measurements, take them out in that order to remember their positions. Prepare the mortar and spread it evenly. The thickness of the thinset should be around ¼ inches.
Set the Tiles
The last step is to again set the tiles over the mortar. Arrange them as you have done before to maintain balance and preciseness. Take care of the extra spacing and leveling of the tiles. And most importantly, your tiled surface should be above the drainage hole. Because it will help in the complete draining of running water.
Tips to Tile a Shower
Measure your shower floor size before you buy or select the tiles. It will help you estimate their size, and you don’t have to waste much while implanting.
Estimate the number of the pieces by drawing the floor sketch with proper scaling. You will get an estimate of their arrangement even before you start the actual work.
You can use a spirit level after tiling to check the horizontal orientation. If any piece is offset, not properly leveled, or installed. Fix it right away to avoid future consequences.
Use a proper tile cutter to cut the extra strips precisely
After finishing the work, apply a sealant so that no water can seep below the flooring.
Conclusion
People consider that tiling a shower floor is a complex task and can only be handled by professionals. However, it seems right, but it can be your DIY project. You just need to be smart and good at calculation. Otherwise, it is a fun task to do. Calculate the area, estimate tiles number, and check the arrangement. Spread the mortar after finalizing and tile with precision.
Hope, now you have a clear-cut guide on how to tile a shower floor. Start tiling your shower floor now!
If you’re looking for tile installation services in the Columbus, Georgia area, contact us today! Our team of experts can help with any size job. Contact us to schedule a consultation so we can discuss your project needs and get started right away!
Check out our other articles
Trending Bathroom Flooring Options
Grey Porcelain Bathroom Floor Tile
tile, shower, floor
