New tiles are so beautiful and durable, but they do need to be sealed before you start living in them. If not done after installation has been completed there is a chance that water could seep through the grout between tiles which would lead to dirtiness or even mildew problems down the line! What is the best way around this issue? Get yourself some sealer, we will look what and how to seal grout on tile floor.
When
If you have just installed new tiles on your floors, showers or countertops and still have a wet surface then it is best not to seal them right away. It will take time for the grout in these places finish curing before being able to handle sealer with ease so wait until all of that’s dry first! Once this has happened however we recommend using a professional sealer.
Why
So, you’re thinking of protecting your grout from stains and mold. That’s a good idea! So how do we go about doing that? Well first let me tell ya what happens when there are spills on the tile surface: The cement-based product absorbs all kinds of liquid so if not cleaned up right away…well bad news probably waitin’ for ya (not really).
But don’t worry because sealing does more than protect our favorite flooring material; it also helps make sure water doesn’t seep deep into its pores which would lead to accelerated drying time AND promote mildew growth in these sensitive areas by trapping dirt particles inside where they can easily contaminate other surfaces nearby – like kitchen countertops or even laundry room
How do I know what to use
With so many different options for sealing your grout, it’s hard to know which one is best. For example:
What about silicone sealants that are designed specifically around the needs of professionals!
Fixing up these problems can be expensive when done by other companies but thankfully there is an affordable solution with our help at hand because we want nothing more than make sure all aspects – including protecting against stains and mildew growth-are taken care off properly before they cause severe damage.
What type can be sealed?
Over time, water and grime can penetrate the cracks in your tile surface. Sealing them will help reduce damages to your tiles as well as prolong their life span! But there are some exceptions for certain types of flooring grouts; one example being epoxy-based products which do not need sealing because they aren’t porous materials like others out there.
Epoxy Grouting is a great way to protect against stains and water. It does not get cracked or chipped like cement-based grouts, which makes it less prone to these problems in the long run! Before applying epoxies on nonporous surfaces such as glass tiles for example you must first seal them by using sealed tiles made from natural stone materials.
Epoxy grouting is a fantastic material to use on nonporous, such as glass and helps prevent stains from staining your floors. Unlike cement based grouts which become hard after it sets or cracks because they lack flexibility epoxy never loses its strength making them less prone to chipping and cracking over time, SO its not needed in this case.
Ceramic tiles can be a great option for those with high-traffic areas. These surfaces do not need to have their surface sealed, as they are finished and then protected with an individual’s choice of glaze that will help prevent staining or cracking at the most crucial points on their design plan. But you do need to seal the grout if it is cement based.
Porcelain tiles are a great option for your bathroom floor. They require no sealing and can be cleaned with just soap and water, but they also need to have some extra protection because of their fragile nature. But yes you do need to seal grout on tile floor for maximum protection, applying to the tile is fine.
Non-porcelain ceramic surfaces such as many varieties in the popular “ceramic tile” category do not require any kind sealant since their glazes provide adequate defense against stains or other problems that would demand one (though you should still protect it). Yes you must seal the grout.
Sealing natural stone like marble, travertine, slate or granite can be a bit more difficult than sealing other surfaces. So YES you do need to seal tile floor grout But don’t worry; there are many ways to make your life easier and get better results! First of all you will need some professional sealer for the tile grout because this porous material is vulnerable towards stains & moisture in the air which causes bacteria growths (yeast).
When to reseal:
You might not think that your tile flor grout could be damaged by water, but it is. The porous nature of this cement makes it vulnerable to stains and moisture damage which can lead to an unpleasant odor as well, if left unchecked for too long. To keep this from happening try dropping a few drops into each corner or between two pieces- you will know when it’s time because the grout absorbs those sneaky liquids like prey!
Solution:
Professional grade!
Natural Stone Use:
K.O.R. Natural “Enrich & Seal”
Use K.O.R. Natural “Enrich & Seal” To Give Your Tile And Stonework An Everlasting Sheen
Tile and stonework take a beating every day. Whether it’s from foot traffic or the elements, the surfaces in your home can look older than they really are without maintenance.
No need to hire a maintenance team. Just use K.O.R. Natural “Enrich & Seal” to make your indoor and outdoor surfaces good as new if not better!
Provides Long Lasting Protection And Ensures Easy Maintenance
Using the tile and stone sealer is simple and practical:
Step 1
Clean the tile or stone surface thoroughly using a cloth or broom. Remove all dust, grease, moisture and other contaminants.
Step 2
Apply K.O.R. Natural “Enrich & Seal” using a paint-pad or sealer application applicator. Work the product thoroughly into the surface using a back and forth motion.
Step 3
Allow the sealer to sit for 5 to 10 minutes.
Step 4
Wipe the surface dry with absorbent paper towels. Change towels when damp to ensure the sealer is removed completely.
Step 5
Wait for 30 minutes and then apply a second coat of the enriching sealer. Work across the previous application method.
Step 6
Allow the sealer to sit on the surface for 5 minutes and then clear the product with fresh towels.
Top Benefits
Enhances the natural look and color of stone and tile surfaces.
Reduces staining.
Treated surfaces do not trap moisture.
UV stable.
VOC compliant.
Does not form a gloss or film over treated surfaces.
Maximum stain resistance against grime, oil and food.
Grout and porcelain
K.O.R. Ironclad “Tile and Stone Sealer”
K.O.R. Ironclad “Tile And Stone Sealer” Creates A Tight Seal Over Tile And Stone For Efficient Cleaning
Put down that tile cleaner! You’re skipping a critical step which can make your tile and stonework last for years.
The K.O.R. Ironclad “Tile and Stone Sealer” creates a protective layer over porous stone and tile surfaces making them resistant to stains and moisture.
How K.O.R. Ironclad “Tile and Stone Sealer” Works
K.O.R. Ironclad “Tile and Stone Sealer” places a thin layer of high-end polymers between the surface of the tile or stone and the potential stain. So when you clean the surface with a tile or stone cleaner, the seal gives you time to clean up before the potential damage becomes permanent.
Using the sealer is as simple as wiping a countertop or mopping a floor:
Step 1
Clean the surface thoroughly making sure to remove all dust, grease, moisture and other contaminants.
Step 2
Apply K.O.R. Ironclad “Tile and Stone Sealer” using a clean sponge or a mop with a lambs wool applicator.
Step 3
Allow the sealer to sit for 5 minutes. The sealer may penetrate quickly on porous surfaces. If the surface dries up before time’s up, apply an additional layer of the sealer.
Step 4
Wipe the area completely dry with a clean, microfiber cloth or paper towel. Make sure to remove all residue.
It’s that simple!
Applications
K.O.R. Ironclad “Tile and Stone Sealer” can be applied on:
Granite
Marble
Limestone
Saltillo
Walls
Travertine
Concrete
Masonry
Protecting your grout from stains, mold, mildew is a must. The professional advice on how to seal grout has been given in this article and should help you decide if you want to search Google now for Rarefier or Natural Enrich & Seal from K.O.R. Stone Care Products to give lasting protection against harsh weather conditions like heat, cold, sun exposure etcetera that will make the tiles look old after time due to the contact with these elements which are not kind towards them either! Order online at Kennedy Kitchens and Baths today by clicking here!
K.O.R. Stone Care Products Family
