How To Regrout Shower Tile? Quickest 5-Step Guide
Have you been thinking of getting rid of that chipped and flaky tile in your shower area? If yes, then no worries as we have brought a perfect solution for you! Through this article, you will be getting a step-by-step DIY guide that you can use to have your aesthetic shower tile shine back like a brand new one.
We can understand how frustrating it can be to have peeled-off tiles whenever you try to have a relaxing bath. They not only disturb you but also allow water to enter your tiles beneath while damaging your floor. However, there’s no need to spend big bucks over purchasing new tiles when you can regrout them.
If you are new to regrouting, no problem. Read our 5-step guide to regrout your shower tiles.
Some Magical after installation Products
If you already have the required material, then that’s completely fine. However, after you regrout your shower tiles, you’ll need the products that can work like magic, to keep it that way, right? Even though the marketplace has plenty of products available, but we found the K.O.R. Ironclad “Tile and Stone”, K.O.R Rarefier “Cleaner”, and K.O.R Natural “Enrich & Seal” the best ones.
5 Steps to Regrout Shower Tile
Now that you have the products, it’s time to get into the actionable 5-step guide. Here we go!
Step 1: Preparations
The step involves making the surroundings clear and free of any dirt. Mark the tiles you want to regrout and if any of them is broken beyond repair, try to replace it. Make sure the area is free of moisture and is dry too.
Moreover, if your tiles are damaged and you don’t want to repair them. In that case, try to apply grout in the spaces between the tile and the wall. This way, you don’t have to buy a new tile, and also, your tiles may appear much better.
Step 2: Prepare the Grout
Prepare the material you will use to regrout the tile. Mix up the materials in a perfect quantity. Don’t make the paste too dilute or thick; use it in a balanced form. Moreover, try to mix up the ingredients thoroughly with the help of a paddle. For a safer side, start mixing up in small batches, as if anything goes wrong, you still have some material left to complete the job.
Step 3: Application
With the help of the applicator, regrout the areas that need to be renewed. Try to apply a thin layer and scrape off any excess amount right away. After scrapping the excess grout, clean out the surface with a damp towel. And if any of the grout has ended up in the joints, remove it using a blade.
Step 4: Buff Up
Step 4 involves buffing up the joints and giving them a clear coat of caulk. You can choose whatever color suits you. We recommend you go for a color that is similar to your tiles. However, the white color will always work and will get along well with any sort of tile.
Step 5: Finishing
Now, this is the ending stage, and it doesn’t require you to do much. All you have to do is wipe up all the excess materials. The grout may become harder when it completely dries off, so it is good to remove the excess when it is still wet. At this stage, you can also apply the sealer over the grout to safeguard it from molds or dirt.
To sum it all up, regrouting your shower tiles is fun only when you know how everything works. Hopefully, with our 5-step guide, you got the answer to how you can regrout shower tiles. So, what is stopping you from having that perfect shower space?! Get up and start working on it!
When it comes to your home, you want the best. You deserve an upgrade that will make life easier and more enjoyable. We’ve been in this business for over 25 years and we know what works when it comes to bringing a new look to your bathroom or kitchen renovation project. Our team of experts is ready and waiting to help with any questions or concerns you might have about regrouting shower tile, so give us a call today! Schedule a consultation at Kennedy Kitchens and Baths today if you haven’t already done so; we’re available Monday through Friday from 9am-5pm EST.