How To Clean Ceramic Tile Shower – Step-By-Step Guide
Already tired from the thought of removing the ceramic tiles of your shower? If that’s the case, don’t worry, here’s the help. We all know that the grout between your tiles contributes to the aesthetics of your floor. But dirty grout can make your entire floor look dirty.
However, if your ceramic tile becomes dull and dirty, you can clean it with a relevant tile cleaner. Apart from this, there are several DIY methods to clean your tiles. So read the entire article as we will provide you with some tips on how to clean ceramic tile showers in minutes. Keep scrolling to have more insight!
Simple Steps To Clean Ceramic Tile Shower
Here are the most straightforward and effective steps on how to clean ceramic tile shower.
Picture by https://kennedykitchensandbaths.com
Things To Use
⦁ Scrubbers with non-scratch plastic mesh.
⦁ Floor cleaners such as “Rarefier” from K.O.R. Stone Care Products
⦁ Plastic scrubbing pad.
⦁ Towel for complete drying.
Steps For Cleaning Your Ceramic Tile Shower.
⦁ To begin, use the scrubber to remove debris and stains from shower doors and tiles.
⦁ Then, spray the entire surface with Rarefier tile cleaner. You need to pay attention to areas with heavy dirt deposition. Applying these products will make the dirt on your shower doors and tiles soft and easy to remove.
⦁ Then scrub it with the plastic all-purpose scouring pad until it is spotless. Moreover, for areas with rigid mold and mildew, apply extra cleanser if required.
⦁ Then Wash the extra soap from the shower doors and tiles with hot, clean water and let it dry completely. As a result of the drying process, algae and fungi will not grow on your tiles.
4 Effective Home Remedy Tips for Cleaning Shower Tiles Without Scrubbing
You should try these fantastic methods once for cleaning shower tiles without scrubbing. There are several options, but we have highlighted the most relevant ones for your convenience.
⦁ Vinegar And Dishwashing Detergent
Vinegar is at the top priority when it comes to removing stains from shower tiles. So mix equal parts of vinegar and dishwashing soap, then heat the mixture and pour it into a spray bottle. Then spray the mixture on the stained tiles. Leave this solution for at least one hour and rinse it off.
⦁ Hydrogen Peroxide With Baking Soda
Hydrogen peroxide and baking soda are readily available in our houses. These products are used to clean your shower tiles. To remove dirt from tiles, combine these two and apply the paste to the discolored tiles. This mixture is quite strong, and it removes most stains from tiles, leaving them shiny and clean.
⦁ Borax And Hydrogen Peroxide
This is the best solution when all other options aren’t producing the desired effects. Pour borax into the contaminated tiles and leave it for at least 5 hours. After that, pour hydrogen peroxide into the same tiles and leave it for at least two hours. Finally, wash away the residues with warm water.
⦁ Bleach And Baking Soda
You can make a powerful cleaning solution by combining bleach with baking soda. Apply the paste to the tiles and grout lines once it’s ready. Allow the paste to dry, then clean the tiles with warm water to remove dirt.
Here are a few other articles if you liked this :
Summing it up, tile showers can be simple to clean if you take the effort to clean and maintain them daily. We hope this article has clarified all of your questions about how to clean ceramic tile shower.
Moreover, if you still need help in restoring your tile showers, contact us. We’ll sparkle your house with amazing cleaning service and make sure your shower glows. So what are you waiting for? Begin your cleaning job right away.
how to, clean, ceramic tile, shower