How To Apply Grout Sealer On Tile Floors?
Are you struggling to find the best D.I.Y. method to apply grout sealer on tiles? Well, no worries, as we got your back.
Tiles can lose their glitter and look quite quickly if they are not protected using a grout sealer. Investing all that money on tiles and then bearing this turns out to be a headache for the homeowners.
Applying grout sealer on tiles includes cleaning and filling the grout and applying a second coat when it’s completely dried. If you are new to grout sealing, you might be looking for a detailed guide to applying grout sealer on tiles. This article covers all tricks and solutions to the problems you may face while applying grout sealer on tiles.
Let’s get started on how to seal grout on the tile floor!
DIY Steps To Apply Grout Sealer On Tiles
Let’s look a bit more into it to get a detailed explanation of how to seal grout on the tile floor!
⦁ Allow The Newly Applied Tiles To Dry
The first thing is when to apply the grout sealer on tiles. First, let the newly laid tiles dry. Two to three days are usually enough for tiles to dry completely. This duration may differ in various regions, like places with high humidity will take more time.
0. Tape Off The Corners
The next step is to tape off the corners of the room properly. This step may seem unimportant to you, but it plays an essential part in keeping the seal grouting process neat and detailed. So, make sure to tape off all corners that don’t require seal grouting.
0. Clear And Repair Grout
After the tiles are applied, they may contain some broken pieces and dust particles in the grout. Therefore, the next step is to clean the grouts of your tiled floor thoroughly. If grout requires any repairing, then go for it.
4. Apply The Sealer
Sealers usually come as paint or spray. In the case of the print version, you may have to use a brush or roller. The brush is recommended when you want to do more detailed work. At the same time, the roller can cover more area in less time. The spray version also has some suggestions. Spray slowly to get a neat look.
Now comes the most exciting and awaited step in seal grouting. Grab your equipment and start sealing the grout of your tiled floors. Make sure to fill the grout appropriately with the right amount of sealer.
K.O.R. Stone Care Products Family
5. Apply The Second Coat Of Sealer
The last step is applying the second coat. Look at the sealing closely. Make sure to resist water exposure on newly sealed tiles. You will probably have to wait for 24 to 48 hours for the first coat to dry completely.
Once you are sure that the first coat is completely dried, apply the second coat of grout sealer on your tiles. It will give the final touch and enhance the look of your tiled floor.
K.O.R. Ironclad “Tile and Stone Sealer”
A relatively hot selling product in the market, this “Tiles and Stone Sealer” will bring charm to your luxurious bathroom. For any tile work, K.O.R. Stone Care Products sealer is a crucial step that makes it long-lasting and enhancing.
The unique formula of the K.O.R. Ironclad tile sealer makes the grouts between tiles resistant to moisture and stains. Thus, if you want your tiles to last for years, then grab your K.O.R. Ironclad Tile sealer now!
Conclusion
Applying a Grout Sealer on tiles is a relatively straightforward process. It won’t take much of your time to have your tiled floor in a better look. Additionally, you can save your money, too, thanks to your newfound Grout sealing expertise. Just follow the steps above and make the task easy peasy.
We know how to seal grout on tile floors professionally. You can schedule a consultation by calling us at 706.888.8832 or visiting our website, https://kennedykitchensandbaths.com/. Thank you for reading this article and we hope that it has been helpful in your search for ways to care for your home’s flooring with the best products available!
More info on :
K.O.R. Natural “Enrich & Seal”
K.O.R Rarefier “Cleaner”
apply, grout sealer, how to
